Publicidad
Idiomas disponibles
Idiomas disponibles
12
SERVICE
Change Direction of the Handle
• Turn valves to OFF position.
• Turn off water supplies.
• Pull HANDLE (1) "UP" firmly and rotate clock
counter-wise to release it from ESCUTCHEON (6).
• Remove SCREW (3) and pull off PLASTIC INSERT (2).
• Remove CARTRIDGE NUT (8).
• Remove RETAINING O-RING (4).
• Lift and turn STOP WASHER (5) 90˚.
Replace RETAINING O-RING (4).
• Re-install HANDLE ASSEMBLY.
To Change Cartridge:
• Remove HANDLE (1), ADAPTER (2), SCREW (3)
and CARTRIDGE NUT (8) via steps above.
• Remove cartridge by pulling upward on stem.
Aerator Clean Out
• AERATOR may accumulate dirt causing distorted
and reduced water flow. Remove AERATOR with
supplied aerator key.
• If spout drips, operate handles several times from
OFF to ON position. Do not force - handles turn
only 90˚.
3
5
90˚
90˚
1
6
2
4
5
8
7
Publicidad
