Descargar Imprimir esta página

Walter ZIPWHEEL 34-A 150 Manual página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

4.8 Safety instructions for battery packs:
Protect battery packs from water and moisture!
Do not expose battery packs to naked flame!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Slightly acidic, flammable fluid may leak from defective Li-ion battery packs!
If battery fluid leaks out and comes into contact with your skin, rinse immediately with
plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them
with clean water and seek medical attention immediately.
5. Overview
See page 2.
1 Clip to tighten/release the (tool-free) clamping nut manually *
2 Clamping nut (tool-free) *
3 Support flange
4 Spindle
5 Spindle locking button
6 Sliding on/off switch
7 Electronic signal indicator*
8 Battery pack release button
9 Capacity indicator button
10 Capacity and signal indicator
11 Battery pack
12 Dust filter
13 Side handle with vibration damping *
14 Safety cover
15 Clamping nut *
16 2-hole spanner *
17 Lever for safety guard attachment
* depending on equipment/not included.
Zipwheel cutter 34A150...760 Manual-REV2.221214.indd 11
Walter Surface Technologies Inc. - ZIPWHEEL cutter
ENGLISH EN
11
2015-01-22 9:50 AM

Publicidad

loading

Este manual también es adecuado para:

Zipwheel 34-a 160Zipwheel 34-a 750Zipwheel 34-a 760