Publicidad
Idiomas disponibles
Idiomas disponibles
EN ENGLISH
P
= Nominal power input.
1
P
= Power output.
2
m
= Weight without mains cable.
Measured values determined in conformity with EN 60745.
Direct current.
The technical specifications quoted are subject to tolerances (in compliance with the relevant
valid standards).
Emission values
These values make it possible to assess the emissions from the power tool and to compare
different power tools. Depending on the operating conditions, the condition of the power
tool or the accessories, the actual load may be higher or lower. For assessment purposes,
please allow for breaks and periods when the load is lower. Based on the adjusted estimates,
arrange protective measures for the user e.g. organisational measures.
Vibration total value (vector sum of three directions) determined in accordance with
EN 60745:
a
= Vibration emission value (sanding surfaces).
h, SG
a
= Vibration emission value (sanding with sanding pad).
h, DS
K
= Uncertainty (vibration).
h,SG/DS
Typical A-effective perceived sound levels:
L
= Sound pressure level.
pA
L
= Acoustic power level.
WA
K
, K
= Uncertainty.
pA
WA
During operation the noise level can exceed 80 dB(A).
Wear ear protectors!
18
Walter Surface Technologies Inc. - ZIPWHEEL cutter
Zipwheel cutter 34A150...760 Manual-REV2.221214.indd 18
2015-01-22 9:50 AM
Publicidad
