Publicidad
Idiomas disponibles
Idiomas disponibles
EN ENGLISH
Instructions
1. Declaration of Conformity
We declare in our sole responsability:
These angle cutters comply with all relevant requirements of the directives
and standards. Technical file - see page 3.
2. Specified Use
The cordless angle cutters, when fitted with original Walter Surface Technologies Inc. ac-
cessories, are suitable for grinding, sanding, separating and wire brushing metal, concrete,
stone and similar materials without the use of water.
The user bears sole responsibility for any damage caused by improper use.
Generally accepted accident prevention regulations and the enclosed safety information
must be observed.
3. General Safety Instructions
For your own protection and for the protection of your electrical tool, pay attention to
all parts of the text that are marked with this symbol!
WARNING – Reading the operating instructions will reduce the risk of injury.
WARNING – Read all safety warnings and instructions. Failure to follow all safety
warnings and instructions may result in electric shock, fire and/or serious injury.
Keep all safety instructions and information for future reference.
Pass on your electrical tool only together with these documents.
SAVE THESE INSTRUCTIONS
3.1 Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
4
Walter Surface Technologies Inc. - ZIPWHEEL cutter
Zipwheel cutter 34A150...760 Manual-REV2.221214.indd 4
2015-01-22 9:50 AM
Publicidad
