Publicidad
Idiomas disponibles
Idiomas disponibles
Releasing the clamping nut:
- Lock the spindle (see chapter 7.1). Turn the clamping nut (15) anticlockwise using the
2-hole spanner (16) to unscrew.
8. Use
8.1 Switching On and Off
Always guide the machine with both hands.
Switch on first, then guide the accessory towards the workpiece.
The machine must not be allowed to draw in additional dust and shavings. When
switching the machine on and off, keep it away from dust deposits. After switching off the
machine, only place it down when the motor has come to a standstill.
Avoid powering on the machine accidentally: always switch it off when the battery
pack is removed from the machine.
In continuous operation, the machine continues running if it is forced out of your
hands. Therefore, always hold the machine with both hands using the handles provided,
stand in a safe position and concentrate.
Machines with slide switch:
Switching on: Push the slide switch (6) forward. For continuous activation, now tilt downwar-
ds until it engages.
Switching off: Press the rear end of the slide switch (6) and release.
Zipwheel cutter 34A150...760 Manual-REV2.221214.indd 15
Walter Surface Technologies Inc. - ZIPWHEEL cutter
ENGLISH EN
15
2015-01-22 9:50 AM
Publicidad
