Descargar Imprimir esta página

AL-KO solo T23-125-2HDV2 Traducción Del Manual Original De Instrucciones página 52

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 99
GB
Display
Fault
Err 07
Mower mecha-
nism contact
switch
Err 08
Start relay
Err 09
Solenoid valve
Err 10
Ignition coil
Err 11
Internal supply
voltage
Err 12
Internal supply
voltage monitor-
ing
* : * The display goes out for about 4 seconds.
**: Delete the error by pressing the R key (03/13).
13 AFTER-SALES/SERVICE
In the event of questions of warranty, repair or
spare parts, please contact your nearest AL-
14 GUARANTEE
We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warran-
ty period is determined by the legislation of the country in which the appliance was purchased.
50
Fault description
ECU detects incorrect sta-
tus of the mower mecha-
nism output.
ECU detects incorrect sta-
tus of the start relay output.
ECU detects incorrect sta-
tus of the engine solenoid
valve output.
ECU detects incorrect sta-
tus of the ignition coil out-
put.
ECU detects incorrect sta-
tus of the internal supply
voltage output.
ECU detects incorrect sta-
tus of the internal supply
voltage monitoring.
Fault rectification
1. Switch the ignition off and back on
again (position 1)
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
otherwise contact Service.
1. Switch the ignition off and back on
again (position 1)
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
otherwise contact Service.
1. Switch the ignition off and back on
again (position 1)
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
otherwise contact Service.
1. Switch the ignition off and back on
again (position 1)
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
otherwise contact Service.
1. Switch the ignition off and back on
again (position 1)
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
otherwise contact Service.
1. Switch the ignition off and back on
again (position 1)
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
otherwise contact Service.
KO Service Centre. These can be found on the
Internet at:
www.al-ko.com/service-contacts
After-Sales/Service
493723_a

Publicidad

loading