Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3 Safety remarks
Our products are exclusively intended for professional use by appropriately trained and qualified
personnel and may only be acquired by them.
All safety remarks in these operating instructions are marked with the symbol
Before using the saw, carefully read through these operating instructions and
the valid national occupational safety regulations and act accordingly.
Please keep these operating instructions for later reference and always include them if
the device is sold or passed on to third parties.
Application in accordance with the intended application:
This device is intended for sawing open plaster casts.
Never rivet or screw signs or symbols onto the device, as this can render the
protective insulation ineffective. We recommend using adhesive signs.
Only ever use undamaged plugs and cables.
Check cables and plugs regularly.
The mains voltage and specified voltage rating shown at the device must be in
agreement.
Only ever use original accessories.
Wear personal protective gear such as protective goggles,
ear protectors and gloves.
The device must not be operated in areas at risk from explosion.
Any serious incident that has occurred in relation to the device should be
reported to the manufacturer and the competent authority of the Member State
in which the user and/or patient is established.
4 Scope
The use of oscillating plaster saws mainly takes place in orthopaedics for plaster removal.
4.1 Inteded Use
A hand-held, current-driven (AC) product for cutting gypsum or synthetic material usually during the
removal of a plaster cast. The proximal end (the handle) is usually cylindrical, while the distal end
terminates in a round, crescent-shaped, or circular blade suitable for cutting plaster casting material. The
leaves cut as an electric motor in the handle drives them (swinging). The cut is done by vibration rather
than by sawing.
20
Oscillo-Saw GOLD II
.
Publicidad
