cecotec CONGA CONNECTED Manual De Instrucciones página 42

Idiomas disponibles

ENGLISH

Power adapter. Fig. 5

Mixed tank with different Velcro strips to fix the mop. Fig. 6

Primary and high-efficiency filters. Fig. 7

Side brushes (4). Fig. 8

Silicone brush. Fig. 9

Mop. Fig. 10

Cleaning brush. Fig. 11

Jalisco brush. Fig 12.

2. BEFORE USE

This robot vacuum cleaner includes a package designed to protect it during transport. Take

the robot vacuum cleaner out of the box. Keep the original box and other elements in a safe

place, as this will help you prevent product damage when transporting it in the future. In

case the original packaging is disposed of, make sure all packaging materials are recycled

accordingly.

Make sure all parts and components are included and in good conditions. If there is any

piece missing or in bad conditions, contact the Technical Support Service of Cecotec

immediately.

Warnings

Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,

curtains or other fragile objects which may block or slow down the operation of the robot

vacuum cleaner. Fig. 13

If the room to be cleaned is near a balcony or stairs, a physical barrier must be placed in

order to prevent product damage and ensure safe operation. Fig. 14

Direct exposure to sunlight or great light contrasts may affect the correct operation of the

sensors. If this happens, the robot will stop operating, move it to a new location for it to

start operating again.

3. INSTALLATION

1. Place the charging base against the wall and leave a minimum free space of 2 metres to

the front and 1 metre to each side. Fig. 15

2. Connect the charging base to a power socket. Wind and store the remaining cable in the

lower part of the charging base to prevent accidents. Fig. 16

3. Install both side brushes in their corresponding slots, located on the robot lower part.

Press until they click to make sure they are properly fixed. Fig. 17

4. Press the power switch located on the lower part of the robot. Make sure the power switch

is in the on position (I). Fig. 18

05784