cecotec CONGA 2299 INERTIAL X-TREME Manual De Instrucciones página 50

ENGLISH
2. BEFORE USE
- This robot vacuum cleaner includes a package designed to protect it during transport. Take
the robot vacuum cleaner out of the box. Keep the original box and other elements in a safe
place, as this will help you prevent product damage when transporting it in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content. Fig. 1.4:
1. Robot vacuum cleaner
2. Charging base
3. 2 side brushes
Mop and mop support
4.
Charger
5.
Self-cleaning brush
6.
Mixed tank
7.
Multifunctional brush
8.
9. Instruction manual
10. Spare mop
Warnings
- Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
curtains, or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 2
- If the room to be cleaned is near a balcony or stairs, a physical barrier must be placed to
prevent product damage and ensure safe operation. Fig. 3
- Direct exposure to sunlight or heavy light contrasts may affect the correct operation of the
sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a new
location for it to start running again.
3. INSTALLATION
Place the charging base against a wall and leave a minimum free space of 1.5 metres to
1.
the front and 0.5 metre to each side. Fig. 4.
2. Connect the charging base to a power socket. Coil and store the remaining cord at the
back of the charging base to avoid accidents.
3. Install both side brushes in their corresponding slots, located on the bottom part of the
50
CONGA 2299 INERTIAL X-TREME