cecotec CONGA 2299 INERTIAL X-TREME Manual De Instrucciones página 52

ENGLISH
Cleaning modes
The robot vacuum cleaner includes different modes and functions that can be toggled from
the app.
Automatic mode
- Press the Start/Pause button or select the auto cleaning mode on the app, then the robot
vacuum cleaner will start the automatic cleaning.
- The robot vacuum cleaner will clean the whole surface, edges, around objects such as
tables, chairs etc., until the battery is low, then it will return to the charging base.
Random mode
- The robot vacuum cleaner will clean randomly until the battery percentage is low and it
will return to the charge base.
- To activate this mode, press the random cleaning button on the app.
Scrubbing mode. Fig. 7.
- Fill the water tank.
- Attach the mop to the bracket and the latter to the mixed tank.
- Place the mixed tank on the robot vacuum cleaner and select the scrubbing level on the
app. There are three scrubbing levels: Low, Medium, High.
- Once you have selected the desired scrubbing level on the app, the robot vacuum cleaner
will start the All in One function to vacuum, scrub, and sweep simultaneously thanks to its
mixed tank.
Note
- If you wish to mop, do not fill the water tank.
- When the robot vacuum cleaner has the mixed tank with water in it, it will rotate on its own
to dampen the mop as it leaves the base.
- To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
- It is recommended to be present when the robot vacuum cleaner is scrubbing.
- When the robot vacuum cleaner returns to the charging base, you must remove the mop.
Do not leave the robot vacuum cleaner charging with the mop assembled.
Spiral mode
When you select this mode, the robot vacuum cleaner will intensively clean a specific spot at
maximum power. It will start cleaning at a specific spot and will move outwards in a spiral
motion (1 metre). Then, it will return to the starting spot in an inwards spiral motion again.
Before using this mode, place it in the spot you wish to clean.
1.
When it finishes and returns to the starting point, the robot vacuum cleaner will stop at
2.
52
CONGA 2299 INERTIAL X-TREME