Publicidad
Idiomas disponibles
Idiomas disponibles
3
1
3.5 Application Limits:
Take action to avoid moving machinery, abrasive surfaces, and thermal, electrical, including the arc
from welding applications, and chemical hazards as contact may damage the SRL, which may result
in serious injury or death. The SRL is not designed for use in restraint, personnel riding, suspension,
or work positioning. Rescue applications are beyond the scope of this manual. Do not use the SRL for
these applications except as a back-up PFAS.
4.0 System Requirements
4.1 Capacity:
The 8' FT-X
EdgeCore
TM
combined weight of user, tools, clothing, etc., of:
a. 130 - 310 lbs. (59 - 141 kg) to comply with ANSI and OSHA
b. 130 - 420 lbs. (59 - 191 kg) to comply with OSHA only
4.2 Compatibility Of Connectors:
Connectors are considered to be compatible with connecting elements when they have been designed
to work together in such a way that their sizes and shapes do not cause their gate mechanisms
to inadvertently open regardless of how they become oriented. Contact FallTech if you have any
questions about compatibility. Connectors must be compatible with the anchorage or other system
components. Do not use equipment that is not compatible, see Figure 5. Non-compatible connectors
may unintentionally disengage. Connectors must be compatible in size, shape, and strength. Self-
closing, self-locking connectors are required by ANSI and OSHA.
4.3 Compatibility Of Components:
Equipment is designed for use with approved components and subsystems only. Substitutions or
replacements made with non-approved components or subsystems may jeopardize compatibility of
equipment and may affect the safety and reliability of the complete system.
4.4 Making Connections:
Only use self-locking connectors with this equipment. Only use connectors that are suitable to each
application. Ensure all connections are compatible in size, shape, and strength. Do not use equipment
that is not compatible. Visually ensure all connectors are fully closed and locked. Connectors are
designed to be used only as specified in each product's user instructions.
4.5 Personal Fall Arrest System:
A PFAS is an assembly of components and subsystems used to arrest a person during a fall event. A
PFAS is typically composed of an anchorage and a FBH, with an energy absorbing connecting device,
i.e., an SAL, an SRL, or a Fall Arrester Connecting Subsystem (FACSS), connected to the dorsal D-ring
of the FBH. PFAS components used in conjunction with this SRL should comply with ANSI Z359
requirements and applicable OSHA regulations.
7
4
2
3'
(0.9 m)
2'
(0.6 m)
1'
(0.3 m)
0'
Tie-Back Class 2 Leading Edge SRL-P is designed for use by a single user with a
TM
1
2
3
4
5'
(1.5 m)
4'
(1.2 m)
A
Figure 4 - Anchorage Locations
Anchorage of SRD at Foot Level with 0'
Setback from Leading Edge
Anchorage of SRD at Foot Level with 5'
Setback from Leading Edge
Overhead Anchorage of SRD Above Dorsal
D-Ring
Anchorage of SRD Above Dorsal D-Ring with
5' Setback from Leading Edge
3
1
Publicidad
