Whirlpool AKZ9S 8260 FB Manual Del Usuario página 5

DURATION
DURATION
When the icon flashes on the display, press
to set the cooking time you require and then press
confirm. You do not have to set the cooking time if you
want to manage cooking manually (untimed): Press
or to confirm and start the function. By selecting this
mode, you cannot program a delayed start.
Please note: You can adjust the cooking time that has been
set during cooking by pressing
and then press to confirm.
END TIME (START DELAY)
In many functions, once you have set a cooking time
you can delay starting the function by programming its
end time. The display shows the end time while the
icon flashes.
END TIME
Press or to set the time you want cooking to end,
then press to confirm and activate the function. Place
the food in the oven and close the door: The function
will start automatically after the period of time that has
been calculated in order for cooking to finish at the time
you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase: The oven will reach the
temperature you require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table. During the waiting time, you can press
amend the programmed end time or press
other settings. By pressing
information, it is possible to switch between end time and
duration.
. 6 SENSE
th
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or bake
all the dishes available.
When required, simply indicate the characteristic of
food to obtain an optimal result.
WEIGHT / HEIGHT / PIZZA (ROUND-TRAY-LAYERS)
KILOGRAMS
To set the function correctly, follow the indications on
the display: when prompted, press
required value then press
DONENESS / BROWNING
In some 6th Sense functions it is possible to adjust the
doneness level.
or
: press or to amend it
or to
to change
, in order to visualize
or to set the
to confirm.
DONENESS
When prompted, press
between rare (-1) and well done (+1). Press
to
confirm and start the function.
In the same way, where allowed, in some 6th Sense
functions, it's possible to adjust the browning level
between low (-1) and high (1).
. COOKING WITH STEAM
By selecting the "Forced Air + Steam" or one of the several
6th Sense dedicated recipes it is possible to cook any kind
of food thanks to the use of the steam.
Steam spreads more quickly and more evenly through
food compared to just the hot air typical of Conventional
Functions: this reduce cooking times, locking in food's
precious nutrients and ensuring you obtain excellent, truly
delicious results with all your recipes.
Through the complete duration of the steam cooking the
door must be kept closed.
To proceed with steam cooking, it will be necessary to
provide water to the boiler located inside the oven using
the extractable drawer on the control panel.
When requested on the display with "ADD WATER"
indication, open the drawer by pressing the tilting cap.
Once extracted, open drawer's lid and slowly pour in some
drinking water until the notch corresponding to the level
requested on the display (LEVEL 1 or 2, based on selected
function) is reached. In any case, do not overfill the drawer
exceeding the notch indicating Level 2.
Close the drawer by pushing it carefully towards the
panel until completely closed. The drawer must always
remain closed, except for water filling.
After the first filling, in case of longer cooking cycles,
once water will have ran out, it could be necessary to
add it again, in order to complete the cycle: the oven
will prompt it in case it is needed. Avoid to fill the
drawer when the oven is switched off, or up to it is
requested from the display. We suggest emptying the
drawer after the cooking steam cycle.
or to select the desired level
or to