Publicidad
Idiomas disponibles
Idiomas disponibles
Cutting blade.
Keep your feet away from the tool attach-
ment.
Do not use a saw blade.
Guaranteed sound power level of the prod-
uct.
Guaranteed sound power level of the prod-
uct.
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this product assumes no liability for dam-
age to the product or caused by the product arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised spe-
cialists
• Installing and replacing non-original spare parts
• Improper use
Note:
The operating manual is part of this product.
It includes important instructions for the safe, proper and
economic operation of the product, for avoiding danger,
for minimising repair costs and downtimes and for in-
creasing the reliability and extending the service life of the
product. In addition to the safety instructions in this oper-
ating manual, you must also observe the regulations ap-
plicable to the operation of the product in your country.
Familiarise yourself with all operating and safety instruc-
tions before using the product. Only operate the product
as described and for the specified areas of application.
Keep the operating manual in a good place and hand
over all documents when passing the product on to third
parties.
2
Product description (Fig. 1-6)
1.
Battery*
2.
Rear handle
3.
On/off switch
4.
Tubular shaft
5.
Front handle
5a.
Rubber ring
5b.
Allen screw M5
6.
Leg guard
7.
Locking mechanism (tubular shaft)
8.
Star grip
9.
Lifting eye
10.
Main switch
11.
Switch lock
12.
Charge status indicator (battery)
13.
Front tubular shaft (pole-mounted pruner)
14.
Chainsaw guide bar (guide rail)
15.
Saw chain
16.
Oil tank
17.
Front tubular shaft (hedge trimmer)
18.
Handle
19.
Cutter bar
20.
Front tubular shaft (brush cutter/lawn trimmer)
20a.
Allen screw M6
21.
Protective cover (side)
22.
Thread cutter
23.
Coil capsule
24.
Protective cover (top)
25.
Cutting blade
26.
Transport guard (cutting blade)
27.
Blade guard (hedge trimmer)
28.
Guide bar and chain guard
29.
Carrying strap
30.
Cover
31.
M10 nut
32.
Spring washer
33.
Receptacle spindle
34.
Internal flange
35.
External flange
36.
Fastening nut (chain wheel cover)
37.
Chain cover
38.
Chain tensioning screw
39.
Guide pin
40.
Chain tensioning bolt
41.
Chain wheel
42.
Adjusting screw (saw chain lubrication)
43.
Carabiner hook
44.
Safety tab
45.
Release button (battery)
46.
Battery mount
47.
Trigger (thread coil)
48.
Thread coil
49.
Angle adjustment
50.
Unlocking lever
51.
Cover
52.
Release
53.
Pressure spring
54.
Thread outlet eyelet
55.
Notch
56.
Notch (thread coil centre)
57.
Grease nipple (pole-mounted pruner)
58.
Grease nipple (hedge trimmer)
* = may not be included in the scope of delivery!
3
Scope of delivery (Fig. 1)
Item Quantity Designation
1.
2 x
5.
1 x
5a.
1 x
5b.
4 x
13.
1 x
14.
1 x
www.scheppach.com
Battery*
Front handle
Rubber ring
Hexagon socket screw M5
Front tubular shaft (pole-mounted pruner)
Chainsaw guide bar (guide rail)
GB | 33
Publicidad
