Publicidad
Idiomas disponibles
Idiomas disponibles
d) Adhere to the instructions of the manufacturer
when sharpening and maintaining the saw chain.
If the depth limiter is too low, this increases the ten-
dency towards kickback.
e) Do not saw with the tip of the guide bar. There is a
risk of kick-back.
f) Make sure that there are no objects on the floor that
you can trip over.
Residual risks
The product has been built according to state-of-the-
art and the recognised technical safety rules. Howev-
er, individual residual risks can arise during opera-
tion.
• Cutting injuries.
• Damage to eyes if the stipulated eye protection is not
worn.
• Damage to hearing if the stipulated hearing protection
is not worn.
• Residual risks can be minimised if the "Safety Instruc-
tions" and the "Intended Use" together with the oper-
ating manual as a whole are observed.
• Use the product in the way that is recommended in
this operating manual. This is how to ensure that your
product provides optimum performance.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
WARNING
This power tool generates an electromagnetic field
during operation. This field can impair active or passive
medical implants under certain circumstances. In order
to prevent the risk of serious or deadly injuries, we rec-
ommend that persons with medical implants consult
with their physician and the manufacturer of the medical
implant prior to operating the power tool.
WARNING
In case of extended working periods, the operating per-
sonnel may suffer circulatory disturbances in their
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that causes
the small blood vessels on the fingers and toes to
cramp in spasms. The affected areas are no longer
supplied with sufficient blood and therefore appear ex-
tremely pale. The frequent use of vibrating products can
cause nerve damage in people whose circulation is im-
paired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working im-
mediately and seek medical advice.
ATTENTION
The product is part of the 20V IXES series and may on-
ly be operated with batteries of this series. Batteries
may only be charged with battery chargers of this se-
ries. Observe the manufacturer's instructions.
38 | GB
WARNING
Follow the safety and charging instructions
and correct usage given in the instruction
manual of your 20V IXES Series battery and
charger.
charging process and further information are
provided in this separate manual.
6
Technical data
Cordless multi-function device
Engine voltage
Grass trimmer:
Cutting diameter
Thread count
Max. grass trimmer speed
Brush cutter:
Diameter
Cutting diameter
Mounting diameter
Number of teeth
Max. brush cutter speed
Hedge trimmer:
Cutting diameter
Blade angle adjustment °
Cutting length
Max. hedge trimmer speed
Overall length
Pole-mounted pruner:
Guide rail length
Cutting length
Guide rail type
Saw chain pitch
Saw chain type
Drive link thickness
Drive pinion
Oil tank content
Pole-mounted pruner cutting
speed
Overall length
Weight (without battery)
Motor unit
Grass trimmer (attachment)
Brush cutter (attachment)
Hedge trimmer (attachment)
Pole-mounted pruner
(attachment)
Subject to technical changes!
www.scheppach.com
A
detailed
description
40 V (2x20V)
4000/5500/6200 min
4000/5500/6200 min
+90°/0°/-75° (165°)
880/1100/1360 min
of
the
BC-MFH400-X
380 mm
2xØ1,6 mm
-1
255 mm
1.4 mm
25.4 mm
3
-1
24 mm
390 mm
-1
2.35 m
295 mm
255 mm
AL10-39-507P
3/8"/9.525 mm
3/8,050-39
1.27 mm
7x9.525 mm
140 ml
12/15/18 m/s
2.15 m
3.37 kg
1.45 kg
1.56 kg
2.17 kg
1.63 kg
Publicidad
