Descargar Imprimir esta página

FEIDER Machines FG800 Manual Del Usuario página 37

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
Switch the stopcock to the OFF position.
Clean with a solvent.
Remove the fuel filter from the tank
Wash it with solvent
Rub it.
Insert it again in the tank
7. STORAGE
1. Empty the tank and the carburetor.
2. Shake the tank until it is completely empty.
3. Pour a tablespoon of motor oil through the spark plug hole; pull the starter several times and reinstall the spark plug
(with the ignition OFF). When you notice that the piston is in compression, stop pulling.
4. Keep the generator in a dry and well-ventilated place, and suitably protected with the cover.
5. The fuel used by the machine is explosive. When stopping the machine, you must deal with the fuel properly and
comply with local environmental requirements
6. In case the engine catches fire:
1). Contact immediately with specialized personnel to put out the fire. The user must leave the place immediately to avoid
being injured.
2). Use a CO2 extinguisher. If you do not have an extinguisher or don't know how to use it, use all the tools available to
put out the fire as soon as possible. Do not use foam extinguishers or try to extinguish the fire with sand. If there is some
oil or grease on the surface, sand can be used to extinguish the fire.
3). The engine fire causes smoke and pollution that can poison people and the environment. Request specialized
personnel eliminate pollution according to the local environmental plan.
37

Publicidad

loading