Using
RDS
Functions
Canceling Traffic Announcements
¢ Press the TA button while a traffic
announcement is being received to cancel the
announcement and return to the original
source.
The announcement is canceled but the tuner
remains in the TA mode until the TA button is
pressed again.
Adjusting the TA Volume
When a traffic announcement begins, the
volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
¢ Using the (+) or (—) buttons to set the volume
by adjusting it during traffic announcement
reception.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
TP Alarm function
About 30 seconds after the "TP" or "EON"
indicator is extinguished due to a weak signal, a
5 second beep sounds to remind you to select
another station.
¢ If you are listening to the tuner, tune in
another TP station.
In the built-in CD player mode, the tuner
automatically seeks out the TP station with the
strongest signal in the current area 10 (or 30)*
seconds after "TP" disappears from the display.
* Time taken before Seek begins.
TA function ON
TA, AF functions ON
20
nee