Pioneer DEH-345R Manual De Operación página 12

Audio Adjustment
The audio modes are selected for adjustment tous
with the S button. Volume adjustment is the r) { "J
default mode. When another mode is selected ' {L.
for adjustment, the setting returns to the Volume
mode after 8 seconds.
Volume Adjustment
¢ Press the (+) button or the (—) button
repeatedly to raise or lower the volume.
The display shows low to high volumes from
"VOL 00" to "VOL 30."
Note: Holding down the buttons increases or
decreases the volume level more rapidly.
Change the Setting Mode
Each time the S button is pressed, the display
message and the functions of the (+), (-), (4)
and (®) buttons change in the following order:
F. I. E. mode — Fader/Balance — Bass/Treble
— Loudness.
Using the F. |. E. function
The F. I. E. (Front Image Enhancer) function is
a simple method of enhancing front imaging by
cutting mid- and high-range frequency output
from the rear speakers, limiting their output to
low-range frequencies.
Note: When the F. I. E. function is deactivated,
the rear speakers output sound in all
frequencies, not only bass sounds.
Reduce the volume before disengaging
F, I. E. to prevent a sudden increase in
volume.
12