MSW S-POWER UPS 800 PSW Manual De Instrucciones página 79

Battery information
In AC mode, it will present battery charging status.
Status
Constant current mode /
Constant voltage mode
Floating mode. Batteries are fully charged.
In battery mode, it will present battery capacity.
Load percentage
Load >50%
50%> Load > 20%
EN
Indicate output voltage, output frequency, load
percent, load in VA, load in Watt and discharging
current.
Indicates battery level by 0-24%, 25-49%, 50-74% and
75-100% in battery mode and charging status in line
mode.
Battery
voltage
<2V/cell
2 ~ 2.083V/cell
2,083 ~
2.167V/cell
>2.167V/cell
Battery voltage
< 1.717V/cell
1.717V/cell ~ 1.8V/cell
1.8 ~ 1.883V/cell
> 1.883V/cell
< 1.817V/cell
1.817V/cell ~ 1.9V/cell
1.9 ~ 1.983V/cell
> 1.983V/cell
Display
4 bars will flash in turns.
Bottom bar will be on and the
other three bars will flash in
turns.
Bottom two bars will be on and
the other two bars will flash in
turns.
Bottom three bars will be on
and the top bar will flash.
4 bars will be on.
Display