MSW S-POWER UPS 800 PSW Manual De Instrucciones página 98

07
08
09
11
51
52
53
55
56
57
58
Note: fault codes 51, 52, 53, 55, 56, 57 and 58 are available only in 4000VA
model.
WARNING INDICATOR
Warning code Meaning
EN
1000VA/2000VA models).
Output voltage is too high
(for 4000VA model).
Overload time out.
Bus voltage is too high.
Bus soft start failed.
Main relay failed.
Overcurrent or surge.
Bus voltage is too low.
Inverter soft start failed.
Over DC voltage in AC
output.
Battery connection is
open.
Current sensor failed.
Output voltage is too low.
Audible alarm Icon flashing