MSW S-POWER UPS 800 PSW Manual De Instrucciones página 82

current:
To configure
total charging
current for
solar and
utility
chargers.
(Max.
charging
current =
utility
charging
current +
solar charging
current)
AC input
03
voltage range
Power saving
mode
04
enable/disabl
e
05 Battery type
EN
30A
50A (default)
60A (only chosen model)
80A (only chosen model)
100A (only
model)
Appliances (default)
UPS
Saving mode
(default)
Saving mode enable
AGM (default)
User-defined
40A
70A (only chosen model)
90A (only chosen model)
chosen
110A (only chosen model)
If selected, acceptable AC
input voltage range will
be within 90-280V
If selected, acceptable AC
input voltage range will
be within 170-280V.
If disabled, no matter a
disable
connected load is low or
high, the on/off status of
inverter output will not
be effected.
If enabled, the output of
inverter will be off when
connected load is pretty
low or not detected.
Flooded
(only If "user-defined" is