MSW S-POWER UPS 800 PSW Manual De Instrucciones página 90

Equalization
39 activated
immediately
DISPLAY SETTING
The LCD display information will be switched in turns by pressing "UP" or "DOWN"
button. The selectable information is switched as below order: input voltage, input
frequency, PV voltage, charging current, battery voltage, output voltage, output
frequency load percentage, load in VA, load in Watt, DC discharging current, main
CPU version and second CPU version.
Selectable information
Input voltage/Output voltage
(default display screen)
Input frequency
PV voltage
EN
Enable
If equalization function is enabled in program 30, this
program can be set up. If "enable" is selected in this
program, it is to activate battery equalization
immediately and display main page will show
"disable" is selected, it will cancel equalization
function until next activated equalization time arrives
based on program 35 setting. At this time
not be shown in display main page.
LCD display
Input voltage=230V, output voltage=230V
Input frequency=50Hz
PV voltage=60V
1 day.
Disable (default)
. If
will