MSW S-POWER UPS 800 PSW Manual De Instrucciones página 81

Output
source
priority:
01 To configure
load power
source
priority
Maximum
02
charging
EN
Solar first
Utility first
SBU priority
10A (only available for
chosen model)
Solar energy provides
power to the loads as first
priority.
If solar energy is not
sufficient to power all
connected loads, battery
energy will supply power
the loads at the same
time.
Utility provides power to
the loads only when any
one condition happens:
- Solar energy is not
available
- Battery voltage drops
to low-level warning
voltage or the setting
point in program 12.
Utility will provide power
to the loads as first
priority.
Solar and battery energy
will provide power to the
loads only when utility
power is not available.
Solar energy provides
power to the loads as first
priority.
If solar energy is not
sufficient to power all
connected loads, battery
energy will supply power
to the loads at the same
time.
Utility provides power to
the loads only when
battery voltage drops to
either low-level warning
voltage or the setting
point in program 12.
20A