MSW S-POWER UPS 800 PSW Manual De Instrucciones página 95

BATTERY EQUALIZATION DESCRIPTION
Equalization function is added into charge controller. It reverses the buildup of
negative chemical effects like stratification, a condition where acid concentration
is greater at the bottom of the battery than at the top. Equalization also helps to
remove sulfate crystals that might have built up on plates. If left unchecked, this
condition, called sulfation, will reduce the overall capacity of the battery.
Therefore, it's recommended to equalize battery periodically.
• Applying the equalization function:
Battery equalization function in monitoring LCD setting program 30 must be
enabled first. Than this function in device must be applied by either one of
following methods:
a) Setting equalization interval in program 35.
b) Active equalization immediately in program 36.
• When to equalize?
In float stage, when the setting equalization interval (battery equalization cycle) is
arrived, or equalization is active immediately, the controller will start to enter
Equalize stage.
a) Equalize voltage
b) Float voltage
1. Bulk
2. Absorption
3. Float
4. Equalize
EN