Publicidad
7. CLEANING & MAINTENANCE
Keeping your Greenstar clean is extremely important for both your health and the peak performance
of the machine. We recommend cleaning the juicer immediately after each use, before food particles
have a chance to dry. Since Greenstar extracts minerals, such as calcium, from the produce so well, we
recommend cleaning all of the juicing parts immediately after use to prevent
troublesome mineral buildup.
CLEANING THE GREENSTAR
1. Switch off your Greenstar and unplug it from the electrical outlet. Detach the POWER CORD from the
rear of the machine.
2. Disassemble the machine according to the instructions on page 11 and immerse the juicing
components in warm soapy water.
3. Using the included CLEANING BRUSHES, rinse and scrub the juicing components under warm
running water with a mild detergent.
4. Use the CLEANING BRUSH and the SCRAPER SET to remove any remaining bits of pulp that remain
on the TWIN GEARS or on the HOUSING.
5. If using the FINE SCREEN, brush away from the corners and remove any pulp buildup.
6. Rinse all soapy water from the components; dry them thoroughly before they are reassembled.
NOTE: All parts, expect the SAFETY HOOD are dishwasher safe.
• NEVER allow water to enter the MAIN BODY of the machine.
• NEVER use harsh chemicals, such as bleach, to remove food stains from the juicer.
• NEVER drop any of the components, particularly the TWIN GEARS. Our warranty does not cover
accidental damage.
HELPFUL HINTS FOR EASY CLEANING
Cleaning the Screen
Attach the scraper attachment to the handle and use the tool to scrape off the pulp residue on the
juicing screen. Remove the scraper attachment and replace it with the cleaning brush attachment to
brush away the remaining pulp residue. For pulp that is embedded firmly in the holes of the screen, try
brushing away as much pulp as possible, soaking the screen for 20 minutes in water, and then brush
the screen again.
16
Publicidad
