Bianchi C4205982 Manual De Uso Y Mantenimiento página 11

6. Once the tire is inflated to pressure, you can use the anti-vibration adhesive that's supplied with the Wheel (part number specified in
Tab.1) on the tube valve.
7. Remove the coating from the adhesive.
8. Insert the valve into the adhesive's center hole and lower the adhesive to the rim along the length of the valve.
9. Fix the adhesive in place, straddling the rim.
10. MOUNTING THE WHEEL ON THE FRAME
Refer to the mounting instructions provided by the bicycle, frame, or fork manufacturer
WARNING/SAFETY RULE
Do not exceed the maximum torque of 20 Nm.
Always check to make sure the wheels are locked securely in place by lifting the bike off the ground and applying downward pressure
to the wheels. The wheels must not move. If the wheels aren't locked in place, make sure that the locking levers are well-tightened
and repeat the operation.
Errors in wheel installation or adjustment can result in an accident with serious damage and risk of injury.
SPROCKET PACK ASSEMBLY AND DISASSEMBLY
11S, 12S sprockets from SHIMANO (HG-11)
This wheel is also compatible with the SHIMANO HG-11 freewheel body. For installation and maintenance instructions, refer to the instruction
sheet provided by the sprocket pack manufacturer.
11S, 12S sprockets from SRAM CORPORATION (XDR)
This wheel is also compatible with the SRAM XDR freewheel body. For installation and maintenance instructions, refer to the instruction
sheet provided by the sprocket pack manufacturer.
11S, 12S, 13S sprockets from CAMPAGNOLO (N3W)
This wheel is also compatible with the CAMPAGNOLO N3W freewheel body. For installation and maintenance instructions, refer to the
instruction sheet provided by the sprocket pack manufacturer.
BRAKE ROTOR INSTALLATION
Refer to the manufacturer's instructions for installing the Center Lock brake rotor.
CAUTION/IMPORTANT
It is not recommended to use 6-bolt brake rotors with the Center Lock adapter system.
11