Bianchi C4205982 Manual De Uso Y Mantenimiento página 5

EN
REPARTO CORSE WHEELS
USER AND MAINTENANCE MANUAL
BUILDER/MANUFACTURER
Reparto Corse wheels (hereinafter referred to as '
F.I.V.E. BIANCHI S.p.A. - Via delle Battaglie, 5 -24047 Treviglio (BG) - Web: www.bianchi.com (
Precision, performance and style. Congratulations on pairing your bike with this spectacular wheelset. Disc brake-ready and with an aerodynamic
profile, it's time to ride the perfect lines at the optimum speed.
GENERAL ASPECTS
It is imperative that all users carefully read, understand, and follow the instructions in this user and maintenance manual before using Reparto
Corse wheels. The user remains responsible for damage caused to persons and/or property and to the Wheels if they are used incorrectly or not in
accordance with the instructions below.
This manual is an integral part of the wheels and should be kept for any future reference.
RESPONSIBILITY
F
ailure to comply with the operating instructions and safety requirements contained in this user and maintenance manual shall exempt the
Manufacturer from any liability.
The Manufacturer is also indemnified from any liability, including but not limited to personal safety, in the event that the use and maintenance of the Wheels
are performed in a manner not in accordance with the instructions provided, and/or that the Wheels are used incorrectly or in such a way as to impair
their integrity and/or change their characteristics, and/or non-original spare parts are used, and/or the Wheels are not properly installed on the bicycle.
SPECIFIC SKILLS
This manual is intended for the Wheel user. It includes instructions regarding maintenance and care of the Wheels. Most of the Wheels' maintenance
and repair require specific knowledge and proper equipment. If the user does not have the required specific skills and/or proper equipment, it is
recommended that the user seek professional personnel or a Bianchi dealer.
LEGEND
WARNING/SAFETY RULE
It indicates basic safety standards and rules. Failure to follow these rules may result in accidents, falls, injury to the user and to other people.
CAUTION/IMPORTANT
Signals important technical warnings to be strictly followed for the purpose of proper use of the Wheels.
TECHNICAL SPECIFICATIONS
Table 1.
AXLE
FREEWHEEL BODY
ADHESIVE ANTI-VIBRATION VALVE
VALVES
*Components only available in kit form
Wheel(s) 'Product'
' or ) are made/manufactured by:
FRONT
Ø12 x 100 mm
Code DBU22081 *
H profile < 45 mm
Code C4805266 (L=60 mm) *
hereinafter referred to as 'Manufacturer'
REAR
Ø12 x 142 mm
SHIMANO HG-11
SRAM XDR
CAMPAGNOLO N3W
45 mm < H profile < 60 mm
Code C4805267 (L=80 mm) *
)
H profile > 60 mm
Code C4805268 (L=100 mm) *
5