Descargar Imprimir esta página

Electrolux KOCDP67H Manual De Instrucciones página 26

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Problem
- indicator is off.
- indicator is on.
The steam cooking does not work.
The steam cooking does not work.
It takes more than three minutes to empty the water
tank or the water leaks from the steam inlet opening.
If the display shows an error code that is
not in this table, turn the house fuse off
and on to restart the appliance. If the
error code recurs contact an Authorised
Service Centre.
13.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
14. ENERGY EFFICIENCY
14.1 Product Information and Product Information Sheet according to EU
Ecodesign and Energy Labelling Regulations
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced mode
Number of cavities
Heat source
Volume
Type of oven
Mass
26
ENGLISH
Check if...
There is enough water in the water tank. If water starts
to leak in the appliance, and the indicator is still off con‐
tact an Authorised Service Centre.
There is enough water in the tank. If the tank is full and
the indicator is still on contact an Authorised Service
Centre.
There is no lime residue in the steam inlet opening.
There is water in the water tank.
There is no lime residue in the steam inlet opening.
Clean the water tank.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance. It is visible when
you open the door. Do not remove the rating
plate from the appliance.
We recommend that you write the data
here:
Model (MOD.) :
Product number (PNC):
Serial number (S.N.):
Electrolux
KOCDP67H 949494868
81.2
A+
0.93 kWh/cycle
0.69 kWh/cycle
1
Electricity
72 l
Built-In Oven
32.2 kg

Publicidad

loading