Cleaning The Unit; Caring For The Authentic Leather Parts Of The Xw-Lf3 - Pioneer XW-LF3-T Manual De Instrucciones

Cleaning the unit

• Unplug the power cord from the power
outlet when cleaning this unit.
• Clean this unit using a soft cloth. For
tough dirt, apply some neutral detergent
diluted in 5 to 6 parts water to a soft
cloth, wring out thoroughly, wipe off the
dirt, and then wipe again with a soft, dry
cloth.
• Alcohol, thinner, benzene, insecticides,
etc., could cause the print or paint to
peel off. Also, leaving rubber or vinyl
products in contact with this unit for
long periods of time could mar the
cabinet.
• When using chemical-impregnated
wipes, etc., read the cautions included
with the wipes carefully.
28
En
Caring for the authentic
leather parts of the XW-LF3
• Natural leather is prone to water
damage, including loss or change of
color. Friction or getting wet may cause
the color to transfer to your clothing or
other items. Dyes from clothes etc. may
also transfer to the leather. When using
the unit, do your best to keep it away
from sweat, moisture and water.
• If the leather does get wet, absorb the
water by pressing and wiping with a dry
towel etc., then allow it to dry in a shady
and aerated place. Using a source of
extreme heat, such as a hairdryer, to dry
it may lead to hardening of the leather
and changes in its properties or shape;
therefore such measures should never
be used.
• Any dirt can be removed by gently wiping
with a dry, soft cloth. Do not use any of
the creams or wax etc. available on the
market.
• Coming into contact with alcohol,
thinner, benzene, insecticide etc. will
cause the color of the leather to change,
so do not allow this to happen.
• Avoid placing the unit in direct sunlight.
Doing so may lead to the leather
changing shape, patches of uneven
color, or becoming cracked.
• The leather may retain a distinctive odor
for a while after purchase.