Pioneer XW-LF3-T Manual De Instrucciones página 8

• If the product does not operate normally
when the operating instructions are
followed. Adjust only those controls that
are covered by the operating
instructions. Improper adjustment of
other controls may result in damage and
can require extensive work by a qualified
technician to restore the unit to its
normal operation.
• When the product exhibits a distinct
change in performance - this indicates a
need for service.
Check that there are no irregularities with
the AC adapter or power plug, then insert
the power plug into the specified position of
the AC adapter using the specified
procedure until a click is heard. For details,
see Mounting the power plug on chapter 1.
If there are irregularities with the AC
adapter or power plug, ask your nearest
Pioneer authorized service center or your
dealer to carry out repair work.
• Do not use this unit with a coin, paper
clip or other metal object stuck between
the AC adapter and power plug. Doing so
could cause a short circuit, leading to
fire or electric shock.
8
En
• When mounting the AC adapter on a
wall outlet, make sure there is no space
between the AC adapter and the wall
outlet. Faulty contact or a coin, paper
clip or other metal object getting stuck in
the space could cause a short circuit,
leading to fire or electric shock.
Coin, paper clip or
other metal object
Side
• The power plug could come detached
from the AC adapter and remain in the
power outlet if someone trips on the AC
adapter's power cord or if something hits
the AC adapter. If this happens, remove
the power plug remaining in the outlet
with dry hands, holding it as shown on
the diagram below and without touching
metal parts. Do not use any tools to
remove it.
Do not touch metal parts.
Top