dirna Bergstrom bycool green line COMPACT 3.0 Instrucciones De Montaje página 22

COMPACT 3.0
EN
Position the interior air distribution panel on
13
the front studs with a hexagonal separator of
M6x25 on each stud.
13
EPDM
Gasket
Stud M6
Cabin roof
Upholstey
hexagon M6x25
To present console and the equipment centred
14
on the best placement of the cabin roof .One
time centred to remove console.
Fasten supports tightening nuts until outside
15
EPDM joint (Point 3) of equipment is
compressed, between 3 and 6 mm.
Important: To avoid water from filtering inside
cabin, check EPDM joint tightening with
Compact base, as indicated on diagram.next
page
Unit base
14
Renault premium
Air ducts
A
22
Air conditioning for vehicles
Air duct top side
Interior air distribution
panel
Comprobar la
compresión de la
junta EPDM usando
un flexómetro en las
cuatro esquinas.
14
15