dirna Bergstrom bycool green line COMPACT 3.0 Instrucciones De Montaje página 26

COMPACT 3.0
EN
+
-
1- Connect the upper power supply cable to the back of equipment and lead it through the back of the cab
whilst sticking down the plastic clips and securing it with flanges.
2- Connect the lower power supply cable to the Box of fuses + and in the center of masses- , As it is
indicated, by leading it through the original cable route, secured with flanges, to the back of the cab, to
connect it with the upper power supply cable.
WHEN CONNECTING THE CABLES LEAVE A SUFFICIENT DISTANCE TO PREVENT THEM BREAKING
DUE TO MOVEMENTS OF THE CAB!
IMPORTANT: Due to the unit's complex electronic regulation system, the power connection must be
made directly to the indicated points of the fuse box.
Take care not to invert polarities when connecting the unit to the power supply. If this were to happen, the
unit will not work and irreparable damage will be caused to the compressor modules.
IMPORTANT: For start up please see the User's Manual.
3- Place danger stickers on the cable join and on
the cab elevation device.
Detailed instructions
on power wiring assembly
2
3
2
wiring for power
supply
3
26
Air conditioning for vehicles
1