Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: First switch has no function. Never
change the switches with the audio system on!
GAIN
AMP 1
Automatic Turn-On: The KPX-series
offers two different automatic turn-on
modes; +12V and DC Offset.
• Remote Turn-On: Run 18 gauge wire from the Remote
Turn-On Lead on your source unit to the blue REM wire
on the KPX amplifier's wiring harness.
• DC Offset Turn-On: The DC Offset mode detects a
>2.5V DC offset from the HI-Level speaker outputs when
the source unit has been turned on.
Input Gain Controls: The input gain
control is not a volume control. It matches
the output of the source unit to the input
level of the amplifier. Maximum power out of
the amplifier is possible with the gain in the
lowest position. Incorrectly setting the gain
can result in distorted output or damage
to, and premature failure of, your speakers.
English
Operation
OFF
ON
0
11
HI-PASS FILTER
LO
HI
OFF
120Hz
80Hz
60Hz
INPUT
AMP2
AMP1
FADER LEVEL
L R
L R
INPUT
PWR
PRT
GAIN
AMP 2
0
11
23
Publicidad
