Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications
Model:
Dynamic Power
RMS Power Output
@ 14.4V, 4Ω stereo, ≤ 1% THD+N
@ 14.4V, 2Ω stereo, ≤ 1% THD+N
@ 14.4V, 4Ω mono, ≤ 1% THD+N
@ 14.4V, 2Ω mono, ≤ 1% THD+N
@ 14.4V, 1Ω mono, ≤ 1% THD+N
Frequency Response [Hz]
Selectable Electronic Crossover
KickEQ™ Bass Boost
Fader On/Off Switch
Subsonic Filter
Remote Bass Control
Length [in, cm]
Height [in, cm]
Width [in, cm]
Signal-to-Noise Ratio [dB]
Signal-to-Noise Ratio [dB]
Input Sensitivity
Note: All specifications and performance figures are subject
to change. Please visit www.kicker.com for the most
current information. To get the best performance from
your new KICKER amplifier, we recommend using genuine
KICKER speakers, accessories and wiring.
Pro Tip: All that's left are
speakers, and a
an audio upgrade that will dominate any
factory system! KICKER amplifiers make
it easy to upgrade to solid bass with your
existing or stock source unit. Ask your
dealer about KICKER upgrades.
English
KPX500.1
750W
150W X 1
300W x 1
500W x 1
10Hz – 160Hz
24dB/Octave, Variable
Lo-Pass 40–160 Hz
Selectable 0/+6db
Bass Boost @ 40 Hz
N/A
24dB/Octave, Variable
Hi-Pass 10–40Hz
Yes, CXARC (Not Included)
8 1/2, 21.7
1 11/16, 4.3
3 5/8, 9.2
>90dB, a-weighted, re: rated power
>75dB (ref: 1W output)
Low Level: 125mV–5V
High Level: 1V–40V
few
cables, and you'll have
KPX300.4
350W
45W X 4
75W X 4
150W X 2
20Hz – 20kHz
12dB/Octave
Hi-Pass 60/80/120 Hz
N/A
Yes
N/A
N/A
8 1/2, 21.7
1 11/16, 4.3
3 5/16, 8.4
PowerSports
4
Publicidad
