Publicidad
Idiomas disponibles
Idiomas disponibles
the Controller (3) to select the option.
⚫ Photographing / Video recording: On the home screen, briefly press
the Camera button (4) to start / stop a video recording. And long press
the Camera button (4) to take a photo.
⚫ Background Calibration: Cover the lens cap (9) to finish the
background calibration and open the cap (9) after the calibration or
select to standby or shutdown the device as prompted by the icon.
⚫ Standby: There are two ways to
standby the device. One way is
to cover the lens cap (9) and
then rotate the Controller (3) to
standby the device; and the
other way is to briefly press the
Controller (3) + Camera button
(4) at the same time on the home
screen.
⚫ In the standby mode, rotate the
Controller (3) to wake up the
device, and briefly press the
Camera button (4) to power off the device.
⚫ Power off: On the home screen, press and hold the Controller (3) +
Camera button (4) at the same
time to enter the power-off
countdown interface. The device
will be powered off when the 3s
countdown
ends.
And
shutdown can be stopped by
rotating the Controller (3) before the countdown ends.
⚫ Note: if the standby time exceeds 30 minutes, the device will
automatically shut down.
9
Status Bar
The status bar is located at the top of the image interface and displays the information
related to the current operating status of the device.
1. Current image mode (
: White hot;
Rainbow)
2. Current digital zoom (1.0× to 4.0× adjustable, with an interval of 0.5,
such as 1.5×)
the
: Black hot;
: Red hot;
:
- 9 -
Publicidad
