InfiRay EYE III Serie Manual página 15

menu interface.
⚫ There are two pages of the function options. Rotate the Controller (3)
to switch among the menu options.
⚫ Menu navigation is cyclical: as soon as the last menu option of the first
page is reached, it will turn to the first menu option of the second page
when clockwise rotate the Controller (3), and vice versa.
⚫ Press briefly the Controller (3) to adjust the current parameters or enter
the sub-menus.
⚫ In all menu interfaces, press and hold the Controller (3) to save and
Menu Options and Descriptions
Turn Ultra-Clear mode on/off
⚫ Press and hold the Controller (3) to enter the Main Menu interface.
⚫ Rotate the Controller (3) to select the Ultra-Clear option. Ultra-clear option is
selected by default when entering the menu interface for the first time after power-on.
Ultra-Clear
⚫ Press briefly the Controller (3) to turn on /off the Ultra-Clear mode, during which you
will hear a click of shutter calibration.
⚫ When the function is turned on/off, the icon in the status bar changes accordingly.
⚫ When the Ultra-Clear mode is on, the image contrast is enhanced, which is suitable for rainy, foggy and other harsh
weather conditions.
exit to the home screen, or short press the Camera button (4) to return
to the home screen without saving.
⚫ Automatic exiting from the menu to the home screen will occur when
there is no operation within 10 seconds.
⚫ During the continuous operation of the EYE III, when you exit from the
main menu, the cursor remains at the position before exiting. When
you restart the thermal imaging monocular and enter the main menu for
the first time, the cursor stays at the first menu option.
- 13 -