InfiRay EYE III Serie Manual página 23

screen of the receiver.
⚫ The prompt of 'Sending Data' or
'Receiving Data' and the default
Wi-Fi name will appear on the
upper left conner of the two
screens.
⚫ Short press the Camera button
(4) to switch between the data
sender and receiver.
⚫ During image transmission, you
can still perform the operation on
the EYE III, except
photographing and video recording.
⚫ Note that after the Internet function is turned on, the device cannot turn
on the Wi-Fi function.
16 Firmware Update
⚫ Notifications about updates will be posted on the official website or social
media or InfiRay Outdoor APP.
⚫ Download the update file in the official website (www.infirayoutdoor.com)
and store it to the folder named "update" in the memory space of EYE
III.
⚫ Press and hold the Controller (3) to enter the Main Menu interface.
⚫ Rotate the Controller (3) to select the Firmware Update option.
⚫ Short press the Controller (3) to enter the submenu of the firmware
update.
⚫ Rotate the Controller (3) to select "Yes", and press the Controller (3)
to confirm the selection.
⚫ The device will automatically search for the update file stored in the
folder named "update" in the memory space of EYE III.
⚫ Please make sure the device is fully charged before updating.
17 InfiRay Outdoor
EYE III series thermal imaging monocular support InfiRay Outdoor
technology, which allows you to transmit the image from the monocular to
smartphone or tablet via Wi-Fi in real time.
You can find the detailed instruction about InfiRay Outdoor at the site
www.infirayoutdoor.com.
- 21 -