InfiRay EYE III Serie Manual página 20

Reset to the factory settings
⚫ Press and hold the Controller (3) to enter the Main Menu interface.
⚫ Rotate the Controller (3) to select Factory Reset option.
⚫ Press the Controller (3) to open the submenu of the Factory Reset.
⚫ Rotate the Controller (3) to select Yes for restoring factory settings or No for
canceling the operation.
⚫ Press the Controller (3) to confirm the selection.
Factory Reset
⚫ If Yes is selected, the scope will restart automatically.
⚫ If No is selected, it will be back to the upper menu automatically.
The following functions will be restored to their default settings:
- Image Mode: White hot
- Image Contrast: level 3
- Screen Brightness: level 2
- Image Sharpness: level 3
- Magnification: 1×
Show device information
Info
⚫ Press and hold down the Controller (3) to enter the Main Menu interface.
⚫ Turn the controller for select the Info option.
⚫ The relevant information of the device will be shown by a short press of the Controller (3).
- Auto Calibration: On
- Image Hue: C
- Ultra-Clear Mode: Off
- Wi-Fi: Off
- Wi-Fi Password: 12345678
- Interconnection: Off
- PIP: Off
- Microphone: Off
- Compass: Off
- 18 -