InfiRay EYE III Serie Manual página 19

⚫ In the 15 seconds, rotate the scope along the three axes indicated by the icon, with each axis rotating at least 360°.
⚫ After 15s, the calibration is finished automatically and exit to the Main Menu interface.
Set the GUI Language
⚫ Press and hold the Controller (3) to enter the Main Menu interface.
⚫ Rotate the Controller (3) for select the Language option.
Language
⚫ Short press the Controller (3) to enter the submenu of the language.
⚫ Rotate the Controller (3) to select the desired language.
⚫ Confirm your selection with a short press of the Controller (3) and return to the Main
Menu interface automatically.
Note: The language is not be restored when the device is reset to the factory settings.
Firmware update
⚫ Press and hold the Controller (3) to enter the Main Menu interface.
⚫ Rotate the Controller (3) to select the Firmware Update option.
⚫ Press briefly the Controller (3) to open the submenu of the firmware update function.
Firmware
⚫ Rotate the Controller (3) to select Yes or No and press the Controller (3) to confirm
Update
the selection.
⚫ When select Yes, it will automatically search for the update file in the folder named
update in the memory space and update it.
⚫ For details about how to update, please refer to the Section 16 Firmware Update.
Note: Please ensure that the power of the device is sufficient before the update.
- 17 -