InfiRay EYE III Serie Manual página 18

Set the image hue
⚫ Press and hold the Controller (3) to enter the Main Menu interface.
⚫ Rotate the Controller (3) to select the Image Hue option.
Image hue
⚫ Press briefly the Controller (3) to switch the Image Hue between W (warm) and C
(cool).
⚫ Cool color image is brighter and warm color image is softer and eye protection.
⚫ The switch between the warm and cool hues is not applicable to the Rainbow mode.
Turn on/off and calibrate the compass function
⚫ Press and hold the Controller (3) to enter the Main Menu interface.
⚫ Rotate the Controller (3) for select the Compass option.
⚫ Short press the Controller (3) to enter the submenu of the Compass function.
⚫ In the submenu, you can choose to turn the Compass function on / off, or select
Calibration to calibrate the compass.
Compass
⚫ Rotate the Controller (3) for select the option and press the Controller (3) to confirm
your selection.
⚫ When the Compass is on, it will be displayed on the middle of the status bar on the
top.
Compass Calibration
⚫ When Calibration option is selected, short press the Controller (3) to enter the
compass calibration interface. An icon like a triaxial coordinate system appears on the screen.
- 16 -