InfiRay EYE III Serie Manual página 22

Note: If the device is reset to the factory settings, the name and
password of the Wi-Fi will also be restored to the default settings.
15 Method for Interconnection
Interconnection with Mobile Device
⚫ Turn on the personal hotspot on the mobile device and modify its name
and password to ICS and 12345678.
⚫ Turn the interconnection on in the Main Menu referring to the Main
Menu - Interconnection for details.
⚫ When the interconnection
function is on, it will automatically
search for the hotspot named
ICS and the password
12345678.
⚫ When the interconnection icon is
displayed on the status bar and the prompt 'Sending Data' appears on
the upper left conner of the display, it means that the interconnection
between the two device is successful.
is
⚫ Then, open the InfiRay Outdoor
App on the mobile device, you
can control the device in the
InfiRay Outdoor without affecting
the Internet function of the
mobile device.
Interconnection Between EYE III
Two EYE III devices could also be interconnected manually.
⚫ First, turn on the Wi-Fi function on one device. And turn on the
interconnection function on the other device.
⚫ For faster interconnectivity, please modify the Wi-Fi name and password
to ICS and 12345678 in the InfiRay Outdoor App before interconnection.
⚫ Simultaneously short press the Camera button (4) + Controller (3) for
the two devices to start the pairing.
⚫ When two EYE III are connected, the one whose Wi-Fi is enabled is the
data sender and the other one that the interconnection is on is the data
receiver. The screen image of the date sender will be displayed on the
- 20 -