InfiRay EYE III Serie Manual página 12

3. Ultra-clear mode status (displayed when it is on)
4. Wi-Fi status (displayed when it is on, it will not be displayed
simultaneously with the Interconnection icon)
5. Compass (displayed when the compass is on)
6. Interconnection (displayed when it is connected successfully, it will not
be displayed simultaneously with the Wi-Fi icon)
7. Auto calibration (displayed when it is on)
8. Microphone (displayed when it is on)
9. Power status (When the color is green
percentage is higher than 20%, and the power is sufficient. When the
color is red , the power is insufficient and need to be charged
promptly. When a lightning icon
powered by an external power supply and the battery pack is in
charging.)
10 Photography and Video Recording
EYE III series is equipped with a function for video recording and
photography of the observed image which is saved on the built-in 32GB
memory storage.
, it indicates that the battery
is displayed, the device is
The photo and video files are named with time, so it is suggested to
synchronize date and time in the InfiRay Outdoor application before using
the photo and video functions.
Photography
⚫ On the home screen, press and hold the Camera button (4) to take a
photo.
⚫ When taking a photo, the photo
icon flashes below the
status bar in the upper left
corner of the screen. The photo
is taken successfully when the
icon disappears.
⚫ Photos are stored in the built-in storage.
⚫ When the exclamation mark icon
camera icon, it prompts that the memory space is insufficient. Check
and transfer videos and images to other media to free up the space.
Video Recording
⚫ On the home screen, short press the Camera button (4) to start the
appears on the right side of the
- 10 -