FISCHER FXC 85 Manual De Instrucciones Original página 21

(16) Contact element release button
(17) Removable contact element
(18) Worklight
(19) Depth adjustment switch
(20) Punch pin
(21) Nail strip*
(22) Utility hook
* Accessories shown or described are possibly not
included with the product as standard. You can find the
complete selection of accessories in our accessories
range.
Technical Data:
Cordless nailer
Article number
Rated voltage
Actuation mode
Max. insertion frequency
(with battery ≥ 4 Ah)
Fastener
– Type
– Lenth
– Shank diameter
Standard magazine capazity
Dimensions without rechar-
geable battery
(length × width × height)
Weight according to
EPTA Procedure 01:2014
Weight without battery
Recommended ambient
temperature during
charging
Permitted ambient tempe-
rature during operation
Permitted ambient tempe-
rature during storage
Compatible rechargeable
batteries
Recommended recharge-
able batteries for maximum
performance
Recommended chargers
** Limited performance at temperatures < 0 °C
MOAL_FXC-85.indb 21 MOAL_FXC-85.indb 21
FXC 85
567476
V 18
Full sequential
1/s 2
Nail
mm 15-40
mm 2.6-3.0
26
mm 405 × 138 × 309
4.4 - 5.4
*)
kg 4.1
°C 0 ... +35
°C −5 ... +50
**
°C −20 ... +50
GBA 18V...
ProCORE18V...
ProCORE18V...
≥ 4 Ah
GAL 18...
GAX 18V...
GAL 36...
Noise/Vibration Information
· Noise emission values determined according to
EN 60745-2-16.
· Typically, the A-weighted noise level of the power tool
is: Sound pressure level 85 dB(A); sound power level
96 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
· Vibration total values ah (triax vector sum) and uncer-
tainty K determined according to
EN 60745-2-16
a = 5.7 m/s , K = 1.5 m/s .
2 2
h
· The vibration level and noise emission value given in
these instructions have been measured in accord-
ance with a standardised measuring procedure and
may be used to compare power tools. They may also
be used for a preliminary estimation of vibration and
noise emissions. The stated vibration level and noise
emission value represent the main applications of
the power tool. However, if the power tool is used for
other applications, with different application tools
or is poorly maintained, the vibration level and noise
emission value may differ. This may significantly
increase the vibration and noise emissions over the
total working period.
· To estimate vibration and noise emissions accurately,
the times when the tool is switched off or when it is
running but not actually being used should also be
taken into account. This may significantly reduce
vibration and noise emissions over the total working
period. Implement additional safety measures to pro-
tect the operator from the effects of vibration, such
as servicing the power tool and application tools,
keeping their hands warm, and organising workflows
correctly.
Rechargeable battery
fischer sells some cordless power tools without a
rechargeable battery. You can tell whether a rechar-
geable battery is included with the power tool by
looking at the packaging.
Charging the battery
Use only the chargers listed in the technical data.
Only these chargers are matched to the lithium-ion
battery of your power tool.
Note: Lithium-ion rechargeable batteries are
supplied partially charged according to international
transport regulations. To ensure full rechargeable
battery capacity, fully charge the rechargeable bat-
tery before using your tool fo the first time.
EN
21
13.07.2023 11:23:46 13.07.2023 11:23:46