brennenstuhl GL 400 AS Instrucciones De Uso página 4

Operating instructions
Rechargeable Solar LED Outdoor Light GL 400 AS
Attention: Please read these instructions for use carefully before using the product and keep them in a safe place afterwards.
SAFETY INSTRUCTIONS
Please observe the general safety instructions enclosed with the product, which can also be found at
service brennenstuhl com
The product is not IP44 (protected against foreign bodies and splash water)
– during the charging process
– while using the USB output
The light source cannot be replaced; if it loses its function, the entire luminaire must be disposed of.
The luminaire contains a light source of energy efficiency class E - 0172640162.
TECHNICAL DATA
Protection class:
Protection type / Impact resistance:
Operating temperature:
Storage temperature:
Type
Exchangeable battery type
(Li-Ion)/V/mAh
Charging input connector
Charging input V/A
Charging time
Powerbank V/A
Dimensions (cm)
Weight (kg)
CONTROL UNITS
4
1 2
1. Switch with switching steps
2. Charging socket
3. Charging indicator
4. Solar panel
COMMISSIONING
The product can be switched on and off using the switch (1) and the desired light level can also be set accordingly.
Press several times to switch the light intensity from 100% to 50% to 10% and then to "Off".
The lower the light output setting, the longer the light duration.
III
IP44 / IK05
-10°C - +40°C
-10°C - +40°C
GL 400 AS
18650
Li-Ion 3.6 V / 3000 mAh
USB type C
5 V / 2 A
Approx. 2.5 h
5 V / 2 A
12 x 12 x 10
0,4
3
4