brennenstuhl GL 400 AS Instrucciones De Uso página 5

CHARGING THE BATTERY
1. To ensure optimum function, we recommend that the battery is fully discharged and fully recharged the first time it is used.
2. The charging socket (2) is located under the cap on the back of the light.
3. The charging indicator flashes during the charging process. When the battery is fully charged, the LED lights up permanently.
4. If the battery is not used for a long period of time, recharge it approximately every 3 months to ensure a long battery life.
5. The product can be operated while charging.
6. After charging, be sure to close the charging socket again with the sealing cap.
REPLACING THE BATTERY
1. Open the two screws with a standard Phillips screwdriver.
2. Remove the cover.
3. The standard battery can now be removed.
4. Make sure to reinsert the standard battery in the correct position indicated on the cover.
5. Replace the cover.
6. Close the cover again by tightening the two screws.
POWERBANK FUNCTION
The product has a power bank function that you can use to charge devices with 5 V / 2 A.
You can use the same charging socket that you use to charge the product.
SCOPE OF DELIVERY
Light, 1 m USB charging cable.
EU DECLARATION OF CONFORMITY
UKCA DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
DISPOSAL
Dispose of electrical appliances in an environmentally friendly manner!
Electrical appliances should not be disposed of with household waste!
In accordance with European Directive 2012/19/EU on waste electrical and electronic equipment, used electrical appliances
must be collected separately and recycled in an environmentally friendly manner.
You can find out how to dispose of your old appliance from your local authority.
For further information, we recommend the Service/FAQs section on our homepage www.brennenstuhl.com.
Operating instructions
5