Miller XMT 350 CC/CV Manual Del Operador página 12

Some symbols are found only on CE products.
Some symbols are found only on CE products.
1-1. Additional Safety Symbols And Definitions
1-1. Additional Safety Symbols And Definitions
1-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Some symbols are found only on CE products.
Some symbols are found only on CE products.
2-1. Símbolos de seguridad y definiciones adicionales
�
Algunos símbolos se encuentran únicamente en los productos con la marca CE.
OM-2254 Página 6
Warning! Watch Out! There are possible hazards as shown by the symbols.
�
Hay una lista completa de piezas disponible en www.MillerWelds.com
SECCIÓN 2 – DEFINICIONES
Do not discard product (where applicable) with general waste.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
Warning! Watch Out! There are possible hazards as shown by the symbols.
facility.
Contact your local recycling office or your local distributor for further information.
Do not discard product (where applicable) with general waste.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Do not discard product (where applicable) with general waste.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
Warning! Watch Out! There are possible hazards as shown by the symbols.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
facility.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Contact your local recycling office or your local distributor for further information.
Contact your local recycling office or your local distributor for further information.
Do not discard product (where applicable) with general waste.
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
Do not discard product (where applicable) with general waste.
facility. Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
facility.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Contact your local recycling office or your local distributor for further information.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Contact your local recycling office or your local distributor for further information.
Protect yourself from electric shock by insulating yourself from work and ground.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Disconnect input plug or power before working on machine.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Protect yourself from electric shock by insulating yourself from work and ground.
Disconnect input plug or power before working on machine.
Disconnect input plug or power before working on machine.
Keep your head out of the fumes.
Disconnect input plug or power before working on machine.
Disconnect input plug or power before working on machine.
Disconnect input plug or power before working on machine.
Keep your head out of the fumes.
Keep your head out of the fumes.
Keep your head out of the fumes
Keep your head out of the fumes.
Keep your head out of the fumes.
Keep your head out of the fumes.
Keep your head out of the fumes
Keep your head out of the fumes
Use forced ventilation or local exhaust to remove the fumes.
Use ventilating fan to remove fumes.
Keep your head out of the fumes
Keep your head out of the fumes
Keep your head out of the fumes
Use forced ventilation or local exhaust to remove the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use ventilating fan to remove fumes.
Use ventilating fan to remove fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use ventilating fan to remove fumes.
Keep flammables away from welding. Do not weld near flammables.
Use forced ventilation or local exhaust to remove the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Keep flammables away from cutting. Do not cut near flammables.
Keep flammables away from welding. Do not weld near flammables.
¡Advertencia! ¡Cuidado! Existen peligros potenciales indicados por
los símbolos.
No deseche el producto (si fuese necesario) con los residuos
comunes.
Reutilice o recicle los residuos de aparatos eléctricos y electrónicos
(WEEE) desechándolos en una planta de recolección designada para
tal fin.
Si necesita mayor información, comuníquese con la oficina de reci-
clado de su localidad o con su distribuidor local.
Use guantes aislantes secos. No toque ninguna pieza caliente sin
protección en las manos. No use guantes mojados o deteriorados.
Protéjase de las descargas eléctricas aislándose usted mismo de la
masa y de la tierra.
Desconecte el enchufe de la entrada o la alimentación antes de tra-
bajar en la máquina.
Mantenga su cabeza fuera del humo.
Use ventilación forzada o algún tipo de extracción local para eliminar
los humos.
Use un ventilador para eliminar los humos.
Mantenga los materiales inflamables alejados de la soldadura. No
suelde cerca de materiales inflamables.
Safe1 201
Safe1 201
Safe37 201
Safe1 201
Safe1 2012
Safe1 201
Safe37 201
Safe1 201
Safe37 201
Safe2 201
Safe37 2017
Safe37 201
Safe37 201
Safe2 201
Safe2 201
Safe3 201
Safe2 2017
Safe2 201
Safe2 201
Safe3 201
Safe3 201
Safe4 201
Safe3 2017
Safe3 201
Safe3 201
Safe4 201
Safe4 201
Safe5 201
Safe4 2017
Safe4 201
Safe4 201
Safe5 201
Safe5 201
Safe6 201
Safe5 2017
Safe5 201
Safe5 201
Safe6 201
Safe6 201
Safe7 201
Safe6 2017
Safe6 201
Safe6 201
Safe7 201
Safe7 201
Safe8 201
Safe10 201
Safe7 2017
Safe7 201
Safe7 201
Safe8 201
Safe8 201 Safe9 201
Safe10 201
Safe11 201
Safe8 2012
Safe8 201
Safe8 201 Safe9 201
Safe9 201
Safe11 201
Safe12 201
Safe9 2012
Safe9 201
Safe9 201 O
Safe12 201
Safe13 201