Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
WARNING
ing any maintenance on gun or wand.
l Maintain the product by adopting a program of consci-
entious repair and maintenance. It is recommended that
TROUBLESHOOTING
WARNING
PROBLEM
The gun leaks.
The lance segment
leaks.
Unit won't spray.
NOTE: Be sure to use enough thread seal tape on inlet fitting threads.
8 | English
Relieve pressure before perform-
Work in a clean, uncluttered area.
POSSIBLE CAUSE
The fitting of the inlet is not tight.
Over-pressurization
The connection is not tight.
Unit is clogged.
Not connected to a nozzle.
the general condition of any tool be examined before it
is used. Keep your wand in good repair. Keep handles,
dry, clean and free from oil and grease.
CORRECTION
Use thread seal tape on inlet.
Check that the pressure washer's PSI
doesn't exceed the manufacturer's
specifications.
Tighten the lance segment.
Reverse flush the unit with water.
Connect an appropriate nozzle.
Publicidad
