Publicidad
Idiomas disponibles
Idiomas disponibles
•
When the child is not in the car, the carrycot must remain
fitted in place or it should be stored in the trunk.
•
PRG declines all responsibility for the incorrect use of
this product.
USE IN CAR - IMPORTANT NOTICE!
READ CAREFULLY
•
Please read these instructions carefully before using
the product.
•
KEEP THIS MANUAL FOR FUTURE REFERENCE.
•
Carefully follow the instructions for the assembly and
installation of this product. Do not let anyone use this
product without having first read the instructions.
•
Keep this manual together with the product.
•
No safety car product can guarantee total safety
to the baby in the event of an accident; however,
the use of this product reduces the risk of injury
and death.
•
Incorrect use of the product increases the risk of
serious injury to the baby, not only in case of an
accident, but also in other situations as well.
•
If the product is damaged, deformed or worn, it must
be replaced: it might have lost its original safety
characteristics.
•
Do not make any modifications or additions to the
product without the manufacturer's approval. Do not
use accessories, spare parts or components not supplied
by the manufacturer.
•
Never leave your child unattended in the carrycot in the
car for any reason.
•
Never leave the carrycot on the car seat unfastened: it
might knock other passengers injuring them.
•
If the car has been left in the sun for a long time,
check the carrycot before placing your child in it,
as some parts could be very hot, and should be
allowed to cool down to avoid burning the child.
•
After an accident, even a slight one, the carrycot could
be damaged, even if this is not visible to the naked eye.
It must in any case be replaced.
•
Do not use second-hand car safety devices. They may
have suffered structural damage, even if this is not
visible to the naked eye.
•
Each country has different safety laws and regulations
for the transportation of children in cars. For this reason,
it is recommended that you contact your local authority
for further information.
•
PRG declines any liability for improper use of the
product.
IMPORTANT – READ THE INSTRUCTIONS CAREFULLY
BEFORE USE AND KEEP FOR FUTURE REFERENCE.
• WARNING:
KEEP PLASTIC BAGS AWAY FROM CHILDREN
TO AVOID SUFFOCATION.
• WARNING:
Never leave the child unattended.
• WARNING:
This product is only suitable for a child
who cannot sit up unaided. Maximum weight of the
child: 9 kg.
•
Indicative age of use: 0 – 5/6 months.
• WARNING:
Only use on a firm, level and dry surface.
• WARNING:
Do not let other children play unattended
near the carrycot.
• WARNING:
Do not use if any part is broken, torn or
missing.
• WARNING:
Never use this carrycot on a stand.
• WARNING:
This carrycot can only be used on the PRG
METROPOLITAN PRO Stroller.
•
Only use spare parts supplied or approved by the
manufacturer.
•
Always be aware of the risk of open fire and other strong
heat sources such as electric bar fires, gas fires, etc.
Never leave the carrycot in the vicinity of these heat
sources.
•
Do not add another mattress on the upper part
of the mattress supplied or recommended by the
manufacturer.
54
•
Check regularly the physical and structural
integrity of the product. Specifically, check the
carry handle and the bottom of the carrycot.
Should any damage or signs of wear and tear be
noticeable, do not use the product and keep out
of the reach of children.
•
Before assembly, ensure that the product and
its components have not been damaged during
transportation. In this case, do not use and keep out of
the reach of children.
•
Ensure that the handle is in the proper position for
transport before lifting or transporting the carrycot.
•
Do not attach accessories, spare parts or components
not supplied by the manufacturer. Any unauthorised
modifications made to the product will relieve the
manufacturer of its responsibility.
•
Do not leave anything inside the carrycot that might
reduce its depth.
•
Ensure that the carrycot is attached properly to the
stroller before placing your child inside.
•
Products exposed to direct sunlight will heat up;
leave them to cool down before placing the child
inside.
•
The carrycot is not designed for children to sleep in for
long periods of time: this product is not a substitute
for a cot.
•
It is recommended that the carrycot be aired out after
prolonged use.
•
Before lifting or transporting, the base needs to be
adjusted to the lowest position.
•
The child's head must never be lower than its body in
the bag.
• WARNING:
The restraint system must be used only when
transporting your child in the car.
• WARNING:
The restraint system must be removed when
the product is used outside the car.
•
Keep the carrycot out of the reach of children when
it is not in use.
CAR SEAT GR 0+
INSTALLING THE SAFETY CHILD CAR SEAT
IN YOUR CAR
50.
This product is suitable for installation with
three-point seat belts which will be divided into hip
and shoulder belt, as shown in Fig. 50a.
51.
Place the child car seat in a rearward facing
position on the seat or with the backrest forward
facing. The carrying handle must be locked in an
upright position, as shown in Fig. 51a.
52.
Thread the upper section of the safety belt across
the front (foot end) between the shell and two belt
hooks, as shown in Fig. 52a.
53.
Place the upper section of the safety belt around
the car seat and slide it into the belt hook on the
back, as shown in Fig. 53a.
54.
The retaining hook holds the safety belt in place,
as shown in Fig. 54a.
55.
Insert the safety belt part into the buckle.
Make sure the safety belt is not twisted. Tighten
it as much as possible. Check again to make sure
the belt is thread through all three blue belt hooks,
as shown in Fig. 55a.
USING THE CAR SEAT
56.
Loosen the shoulder belts by pressing the quick
release button and pulling the shoulder belts
towards you as shown in Fig. 56a, then put down the
crotch strap as shown in Fig. 57a.
57.
Join the hooking rings and insert them into the
buckle as shown in Fig. 58a.
58.
Pull the shoulder belts tight using the quick
adjuster belt strap on the front. The loop can be
secured under the cover rim.
59.
Adjust the height of the shoulder belts.
The shoulder belts should run through the slots
located directly above the baby's shoulders as
shown in Fig. 59a. Pull the shoulder belts through
the slots in the shell and cover. Place the shoulder
belts back, at the required height and use the same
slots in both shell and cover. Check to make sure
the belts can be used properly and that they are
not twisted
60.
Press the buttons on both sides of the carrying
handle at the same time and then adjust
the carrying handle to the desired position.
The buttons will pop up again once the handle is
in position 1. carrying position/driving position
2. Sleeping position/rocking position 3. sitting
position as shown in Fig. 60a.
55
Publicidad
