Urmet 1083 Manual De Configuración página 30

The meaning of the buttons on the Homepage is as
follows:
1. Press the "Device configuration" button to
configure the call forwarding function on a device.
2. Press the "Device replacement" button to start the
procedure for replacing a damaged device.
3. Press the "Firmware upgrade" button to start the
procedure for updating the firmware of a device.
4. Press the "User Account" button to view and edit
all information relating to the currently logged in
account.
5. By
pressing the
parameters of the app can be configured.
The various functions listed above are described
indetails in the following chapters.
5. Press the "Exit" button to exit the CallMe Set app.
6. Press the
"Info" button to see the software
version of the App, access the Urmet website.
30
"Settings" button,
4. DEVICE CONFIGURATION
To configure your device, firstly create an account
(or log in using an existing account), as explained in
the "CREATE A NEW ACCOUNT OR USE A SAVED
ACCOUNT" section.
From the Home Page select the "Device configuration".
You will display:
certain
The call forwarding function can be configured for the
following devices:
Video door phone 1760/31A - /32A - /33A
—
Video door phone 1760/15 - /16 - /18 - /19
—
DS1083-160A