Urmet 1083 Manual De Configuración página 43

6. FIRMWARE UPGRADE
The firmware of some devices can be updated over the
CallMe Set app. Proceed as follows:
In order to carry out the firmware update, the device
you wish to update must have been configured (see
Device Configuration).
chapter
Click on the "Firmware Upgrade" button on the
homepage.
The following page will appear:
DS1083-160A
The firmware can be updated for the following devices:
Video door phone 1760/31A - /32A - /33A
—
Video door phone 1760/15 - /16 - /18 - /19
—
VIDEO DOOR PHONE 1760/31A -/32A -/33A
1. Press the "1760/31A, 32A, 33A" button on the app
to prompt the following screen:
2. On the video door phone, press the
access the Top Page, then press the
to access the setting page.
3. In the settings menu, select the item "Advanced
Settings".
4. Press on "Maintenance Mode". A pop-up icon
appears on the display of the video door phone;
press YES to enable maintenance mode.
5. After a few seconds the video door phone will
switch to configuration mode and a QR code will
appear on the display.
6. Press the "Scan" button to start the QR code reader
application on your smartphone. Scan the QR code
shown on the display of the video door phone.
button to
button
43