Urmet 1083 Manual De Configuración página 42

8. Once the test is done, the user's smartphone must
be paired with the device to activate the function
(see the "Activating the Call Forwarding Service"
CallMe app configuration
chapter in the
5. DEVICE REPLACEMENT
The steps to be followed to replace a faulty video door
phone in an apartment with a new device.
Click on the "Device replacement" button on the
homepage.
The following page will appear:
42
Select the button for the device to be replaced:
— 1760/31A, 32A, 33A
— 1760/15, 16, 18, 19
booklet).
The following screen appears:
The following pop-up describes the steps to be taken
to correctly replace a faulty video door phone with a
new one.
1. Remove the damaged video door phone from the
system.
2. Install the new video door phone.
3. Configure and test the new device (see chapter
"Device
booklet).
During the configuration of new device, it
is advisable to rename it with the name of
damaged device.
4. On the user's smartphone on which the CallMe
app is installed, the association with the old device
must be removed (see the "Removing a System"
chapter in the
5. Then the user's smartphone must be paired with the
new device (see "Activating the Call Forwarding
Service" chapter in the
booklet).
The procedure must also be carried out on their
respective smartphones if there are other users
who share the call forwarding service.
Configuration" and "Device
CallMe app configuration
CallMe app configuration
Test" in this
booklet).
DS1083-160A